Ici juste des notes sans commentaires 🙂 .
Midnight Commander
Downloaded « mc-4.8.1-arm-0.txz »
funpkg – i mc-4.8.1-arm-0.txz
glib2-2.30.2-arm-0.txz
Desktop raspberry sur version lite
sudo apt install raspberrypi-ui-mods
Erreur
N: Is the package apt-transport-https installed?
sudo apt-get install apt-transport-https
Xrdp
Problem Connecting
remove the following packages : xrdp, vnc4server, tightvncserver
sudo apt-get remove xrdp vnc4server tightvncserver
install tightvncserver followed by xrdp
sudo apt-get install tightvncserver
sudo apt-get install xrdp
sudo apt-get install network-manager
Collage
ABS Actéonte
PET ?
PLA ?
Octoprint
Webcam HD Microsoft LifeCam VX-800
### Configure whether to automatically resize the SD on first boot
#
# Available options are:
# – yes: perform resize
# – no: don’t perform resize
perform_resize= »yes »
### Configure which camera to use
#
# Available options are:
# – auto: tries first usb webcam, if that’s not available tries raspi cam
# – usb: only tries usb webcam
# – raspi: only tries raspi cam
#
# Defaults to auto
#
camera= »auto »
### Additional options to supply to MJPG Streamer for the USB camera
#
# See https://github.com/foosel/OctoPrint/wiki/MJPG-Streamer-configuration
# for available options
#
# Defaults to a resolution of 640×480 px and a framerate of 10 fps
#
#camera_usb_options= »-r 640×480 -f 10″
camera_usb_options= »-y »
### Additional webcam devices known to cause problems with -f
#
# Apparently there a some devices out there that with the current
# mjpg_streamer release do not support the -f parameter (for specifying
# the capturing framerate) and will just refuse to output an image if it
# is supplied.
#
# The webcam daemon will detect those devices by their USB Vendor and Product
# ID and remove the -f parameter from the options provided to mjpg_streamer.
#
# By default, this is done for the following devices:
# Logitech C170 (046d:082b)
#
# Using the following option it is possible to add additional devices. If
# your webcam happens to show above symptoms, try determining your cam’s
# vendor and product id via lsusb, activating the line below by removing # and
# adding it as shown examplatory.
#
# If this fixes your problem, please report it back so we can include the device
# out of the box.
#additional_brokenfps_usb_devices=(« 046d:082b » « aabb:ccdd »)
additional options to supply to MJPG Streamer for the RasPi Cam
#
# See https://github.com/foosel/OctoPrint/wiki/MJPG-Streamer-configuration
# for available options
#
# Defaults to 10fps
#
#camera_raspi_options= »-fps 10″
`
Impossible de supprimer un raccourci épinglé dans windows 10
Pour ceux que ça intéresse, il faut supprimer les fichiers du dossier%APPDATA%\Microsoft\Windows\Recent\AutomaticDestinations
Déplacement site wordpress en local. Mise à jour de la base de données
https://interconnectit.com/products/search-and-replace-for-wordpress-databases/